ASTM A490-14
- standard by ASTM International, 08/01/2014
- Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
- Category: ASTM
$58.00
$29.00
Full Description
1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.
1.2 These bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using Specification A325 or A490 bolts, approved by the Research Council on Structural Connections; endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.2
1.3 The bolts are furnished in sizes 1/2 to 11/2 in., inclusive. They are designated by type denoting chemical composition as follows:
Type | Description |
|
|
Type 1 | Medium carbon alloy steel |
Type 2 | Withdrawn in 2002 |
Type 3 | Weathering steel |
1.4 This specification provides that heavy hex structural bolts shall be furnished unless other dimensional requirements are specified on the purchase order.
1.5 Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.
1.6 For metric bolts, see Specification A490M Classes 10.9 and 10.9.3
1.7 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.8 The following safety hazards caveat pertains only to the Test Methods portion, Section 12 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Product Details- Published:
- 08/01/2014
- Number of Pages:
- 6
- File Size:
- 1 file , 110 KB
- Redline File Size:
- 2 files , 190 KB
- Note:
- This product is unavailable in Russia, Ukraine, Belarus
Document History
ASTM F3125/F3125M-22
ASTM F3125/F3125M-21
ASTM F3125/F3125M-19
ASTM F3125/F3125M-18
ASTM F3125-15
ASTM A490M-14a
ASTM A490-14
ASTM A325-14
ASTM A325M-13
ASTM A490M-12
ASTM F2280-12
ASTM A490M-11
ASTM A490-11
ASTM F2280-11a
ASTM F1852-11
ASTM A490M-10e1
ASTM F2280-11
ASTM A490-10ae1
ASTM A490-10a
ASTM A490-10
ASTM A325-10
ASTM A490M-09a
ASTM A490-09
ASTM F1852-08
ASTM A490M-08
ASTM A325M-09
ASTM A325-09
ASTM A325M-08
ASTM F2280-08
ASTM A490-08a
ASTM A490-08
ASTM A325-07
ASTM A490M-04ae1
ASTM A325-06
ASTM A325M-05
ASTM F1852-05
ASTM A325M-04b
ASTM A490M-04a
ASTM A325-04a
ASTM F1852-04
ASTM A490M-04
ASTM A325M-04
ASTM A325-04
ASTM A490M-03
ASTM F1852-02
ASTM A490-02
ASTM A490M-00
ASTM A325M-00
ASTM A325-00
ASTM D4083-89(2016)
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)..
$24.00 $48.00
ASTM B674-05(2016)
Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube..
$27.00 $54.00