ASTM C497M-20
- standard by ASTM International, 02/15/2020
- Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
- Category: ASTM
$67.00
$34.00
Full Description
1.1 These test methods cover testing of concrete pipe, concrete box sections, manhole sections, and tile. The test methods described are used in production testing and acceptance testing to evaluate the properties provided for in the specifications.
1.2 The test methods appear in the following order:
| Section |
External Load Crushing Strength | 4 |
Flat Slab Top | 5 |
Base Section Test | 6 |
Core Strength | 7 |
Absorption | 8 |
Hydrostatic | 9 |
Permeability | 10 |
Manhole Step | 11 |
Cylinder | 12 |
Gasket Lubricant | 13 |
Joint Shear | 14 |
Alkalinity | 15 |
Gasket Measurements | 16 |
Off-Center Hydrostatic Joint Test | 17 |
Hydrostatic External Joint Test Method | 18 |
Welded Splice Pull Test | 19 |
1.3 The test specimens shall not have been exposed to a temperature below 4°C for the 24 h immediately preceding the test.
1.4 If any test specimen fails because of mechanical reasons such as failure of testing equipment or improper specimen preparation, it shall be discarded and another specimen taken.
1.5 Specimens shall be selected in accordance with the specifications for the type of pipe or tile being tested.
1.6 These methods are the metric companion of Test Methods C497.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardProduct Details
Document History
ASTM C497M-20
ASTM C497M-19a
ASTM C497M-19
ASTM C497M-16
ASTM C497M-13ae1
ASTM C497M-13a
ASTM C497M-13
ASTM C497M-05
ASTM C497M-04e1
ASTM C497M-04
ASTM C497M-03
ASTM C497M-02
ASTM D3925-02(2015)
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings..
$30.00 $60.00
ASTM A194/A194M-15
Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High ..
$33.00 $65.00